# VGU120080104
- 13 -
7. MAINTENANCE AND OPERATION RECOMMENDATIONS
1.
When powered by a hydraulic generator, it is forbidden to switch it on
during completion of any maintenance (assembly and disassembly, setting
the machined elements).
2. Switch the generator on only after making sure that the preparation has been
finished and there is no danger of injury.
3. Do not pull out the clamp pusher with no clamping matrixes in the head.
4. Use adequate dies for a given type of terminals and wire diameter (die selection
– Table p. 12).
5. Clamp terminals until the dies come together or until the activation of the pump
overflow valve activation.
6. Protect the equipment against the influence of atmospheric factors, corrosion,
debris and mechanical damage.
7. The fast connection should be maintained clean to prevent debris from entering
the circulation and damaging the pump, supporting equipment or fast connection.
