Ericsson T60c, User Manual

Page: 53 / 100

48
Using Voice Commands
Note! An icon appears next to the contact names which
have a voice label.
Voice Caller ID
You can choose whether you want to hear the recorded
voice command for a name when you receive an
incoming call.
1 Scroll to
SETTINGS
, 6(/(&7 , Voice control ,
6(/(&7 , Voice settings , 6(/(&7 , Caller name ,
6(/(&7
.
2 Select On or Off.
Voice Dialing
Voice Activated Dialing
1 From standby, press and hold
6(/(&7
until you
hear a tone.
2 Release
6(/(&7
, lift the phone to your ear and say
“Call”, then say a name, for example “John”. The
name is played back to you.
3 If you have saved several numbers for that contact:
Say the number type that you have recorded earlier
for example “home” (the phone will show you the
number types available for that contact). The call is
connected.
Note! Only the number types available for that contact
are played to you. Other and Fax number types are
not available for voice dialing.
From standby, you can also initiate voice dialing and
voice control of voice memos by:
• pressing and holding either side volume key.
• pressing and holding the handsfree button (when
using a portable handsfree or a
Bluetooth headset).
• saying the magic word. See “The Magic word” on
page 50.
Voice Digit Dialing
It is possible to dial a phone number by speaking the
digits with a short pause between each digit.
Settings include
Echo and Tone. Echo feedback will echo
the accepted digit while tone dialing will give a quick
click or tone to indicate the digit was accepted. Echo
is
the default.From standby, press and hold
6(/(&7
until
you hear a tone.