Ericsson T60c, User Manual

Page: 26 / 100

Using Menus
21
submenu are Card setup and Set calling cards . You can
store up to three calling cards.
You will be prompted to enter your PIN to enter the
&DOOLQJFDUGV
submenu. The default PIN is 0000 .
&DUGVHWXS
To set up your calling cards, make sure you have the
calling card access numbers (numbers provided by your
long distance carrier) and the verification numbers
(numbers you must enter to allow the calling card call to
be completed).
When you enter the
Card setup submenu, you are
prompted for the following information: Your PIN; the
Name of your calling card; the Access number; the
Dialing delay; Code first or Number first; Verification
number; and Dialing delay again.
6HWFDOOLQJFDUGV
The Set calling cards submenu allows you to select which
calling card to use for a particular call. You can select a
specific calling card or none by scrolling until the calling
card you want to use is highlighted. Press left softkey
to
choose the highlighted selection.
Note! Only cards that have been set up will appear as
options for Default card.
0DNLQJD&DOOLQJ&DUG&DOO
1 Enter or recall the phone number you want to call.
2 Press and hold the left softkey. The calling card
number and the active calling card are shown in the
display.
3 Release the key after the number has been displayed.
If you are using stops between numbers, you must press
<(6 to send the next sequence of numbers. If you use
pauses, the numbers are sent automatically after the
specified length of time chosen for the dialing delay.
Memory status
This submenu tells you how many positions you have
used in contacts, email addresses, and voice labels.
Options
Phonebook options will appear when you are in the
PHONEBOOK
menu. To see the
PHONEBOOK
options,