Ericsson T18 User Manual Download

Page: 84 / 96

Glossary

Network. A mobile phone network or system consists of a network of cells. A

radio base station serves each cell from where calls are forwarded to and

received from your mobile phone by wireless radio signals.

Operator. To be able to use your phone, you need a subscription to a network.

You get this subscription from a network operator, together with a SIM card

that you need to use with your phone.

PC-Card. Also called PCMCIA. The PC-card can act as a modem and con-

nect your mobile phone to a laptop or organizer, enabling data and fax trans-

mission. The thin type II card is the most common size. Type III is a thicker

card and can house more than modem functionality.

Phone Book. A memory in your mobile phone where phone numbers can be

stored and accessed by name (alpha memory search) or position.

PIN. Personal Identification Number – a code used for all GSM-based phones

to establish authorization for access to certain functions or information. The

PIN code comes with your subscription.

PIN2. Personal Identification Number 2 – an authorization code which is used

only for special services.

PUK. Personal Unblocking Key – used to unlock a blocked SIM card. This

comes with your subscription.

Roaming. Within your home network, this means that your mobile phone

automatically sets up communication procedures with different radio base sta-

tions when on the move.

Scroll. The word “scroll” in this manual means pressing the left or right arrow

key to move between the menus.

Select. The word “select” in this manual means scrolling to a menu or func-

tion then pressing the

Y E S

key.

Semi-Duplex. In handsfree equipment, full duplex means that the connection

is open for both parties to talk simultaneously. Semi-duplex gives close to, but

not complete, duplex functionality.

Service Provider. A company that provides services and subscriptions to

mobile phone users.

Short Message Service (or SMS) allows messages of up to 160 characters to

be sent and received via the network operator's message centre to your mobile

Summary of Contents for T18

































































































Search results

Summary of Contents for T18

Reviews:

Related manuals for T18

Brands by name

Popular brands

Ericsson T18, User Manual

Search results

Summary of Contents for T18

Reviews:

Related manuals for T18

Brands by name

Popular brands