Browser Operation
36
pens, call your service provider to request a credential
reset for your NEI.
Configuring the Browser Gateway
The Browser Gateway is the IP address of a UP.Link
server to which your phone will connect. The UP.Link
server stores the HDML content for the phone to access.
The phone can store two independent Browser Gate-
ways, allowing the user to easily switch between gate-
ways. To configure the Browser Gateway, do the
following:
1 Enter the
1HWZRUN6HWWLQJV
submenu as described
above.
2 Press
4
to select
*DWHZD\
.
3 To configure the first gateway, select
*:3ULPDU\
,3
. To configure the second gateway, select
*:3UL
PDU\,3
.
4 Enter or modify the primary gateway IP address.
Note!
The "dots" are automatically added. Leading zeroes are
necessary where appropriate.
5 After entering the IP address, press
YES
to accept.
6 Select the
*:6HFRQGDU\,3
or
*:6HFRQGDU\,3
and enter/modify the secondary IP address for the
gateway.
7 After entering the IP address, press
YES
to accept.
8 Press
1
to select
$FWLYH*DWHZD\
and select the gate-
way to make active (
*DWHZD\
or
*DWHZD\
). If the
Active Gateway IP address changes, then the browser
will restart automatically.
Launching Your Browser
To launch the browser, do one of the following:
Press
MENU
to access the menus and press
5
to open
the
%52:6(5
Menu
Press and hold the
MENU
key to switch from Voice
Operation to Browser Operation and launch the
browser.
When the browser is being launched, your phone will
display a screen that will include status messages (like
Connecting
,
Sending
, and
Receiving
) on the
bottom line of the display. If your phone is not properly
configured, you will get a message with that informa-
tion.
The Home Page (designated by your service provider)
will display after you have successfully launched your
browser. You are now connected to the Net!
You can use the navigation and soft keys to choose any
of the selections provided including returning to your
Home Page, switching to Voice Operation, setting book-
marks, configuring the user interface, or changing your
CDPD network settings from Browser Operation.
