Voice Operation
18
Answering Calls
When your phone receives a call, the ring tone sounds,
Incoming Call
appears in the display, and the dis-
play and keypad backlight are illuminated (you can dis-
able the ring tone through the
6(77,1*6
menu). If
you have Caller Number Identification (Caller ID) ser-
vice from your service provider, the caller’s phone num-
ber is shown in the display.
Answer the phone by pressing
YES
.
Incoming Call
is
replaced by the call timer display. End the call by press-
ing
NO
.
Call Waiting
If you have call waiting service from your service pro-
vider, press
YES
to answer a call when you receive the call
waiting signal. You can switch between the two calls by
pressing
YES
. Do not press
NO
until you are ready to end
both calls.
Unanswered Calls
Your phone’s display shows the number of calls you have
received but did not answer. You can clear the number of
missed calls from the display by pressing any key except
YES
. If Caller Number Identification is available from
your carrier, unanswered calls will be stored in the
,QFRPLQJ&DOOV
of the
&$//,1)2
menu. Press
YES
from the Missed Calls Indicator screen to access the
Incoming Call Log.
Temporarily Muting the Ring Tone
To temporarily mute the ring tone without answering
the call, press
NO
,
BACK,
the
UPPER SIDE VOLUME KEY
,
or the
LOWER SIDE VOLUME KEY.
Incoming Call
is
still shown in the display, and you can still answer the
call by pressing
YES
.
Caller Number Identification
If your service provider has Caller Number Identifica-
tion (Caller ID) service, your phone shows the phone
number of an incoming call in the display. If the number
is one that you have stored in your phonebook with a
name, the name is shown when your phone rings. If the
Caller ID information is not available, the message
NO
ID
is shown in the display. The word
Private
may be
shown if the Caller ID is restricted by the service pro-
vider or by the caller.
Muting the Microphone During a Call
To mute the microphone during a call, press and hold
the
BACK
key.
Mic Muted
appears in the display when
the call is muted. Repeat this procedure to return to your
call.
VSDFH"¶´# _
!
Note!
Character sets vary according to lan-
guage selection.
3UHVVWKLV )RU
6SDFH