26
3.
To add the channel, press and hold the "S"
button and then repeatedly press the
∆∆
or H
button until the desired Priority indicator appears:
"S" for non-priority, "P2" for Priority 2, or "P1" for
Priority 1.
4.
If a new Priority 1 or Priority 2 channel is
selected, the previously corresponding priority
channel will become a non-priority SCAN
channel.
5.
To delete a channel from the Scan list, press
and hold the "S" button and then press the
∇
∇
button. The SCAN priority indicator will turn off.
Using SCAN
When SCAN mode is off, press and release the "S"
key to go into SCAN mode. SCAN mode will not be in
effect until the "S" key is released. The "SCN" status
indicator will turn on when the radio is scanning.
To exit SCAN mode, press and hold the "S" key for a
minimum of 1 second and then release.
If no priority channels are on the Scan list (or
programmed), the radio will scan in the manner indicated
in the following paragraphs. When a carrier is detected,
and, if programmed, the correct Channel Guard is
decoded, the display will indicate the detected channel
number. Scanning will stop and the radio will remain on
the channel until the carrier ceases. After the carrier
ceases, the radio will resume scanning.