manualshive.com logo in svg

Ericsson PCS, Operator'S Manual, Page: 25 / 44

Share
Download
Ericsson PCS Operator'S Manual Download Page 25

25

and releasing the PTT button. The "PG" indicator
will flash, indicating Monitor mode and the radio
will beep. No transmission occurs. A second
press of the PTT button will result in a normal
transmission.

4.

To return to Type 99 Selective Call mode, press
the  MONitor button.  The "PG" status indicator
will stop flashing and turn on continuously.

SCAN OPERATION
(8- AND 16-CHANNEL RADIOS ONLY)

The PCS Conventional/DTMF radio may be

programmed for an operator-selectable SCAN and
Priority channel, a fixed Priority 1 channel, or a selected
channel Priority 1 channel. SCAN rate will vary
depending upon the number of channels on the Scan list
and Channel Guard programming. Fewer channels on
the Scan list will result in a faster SCAN rate.

Adding Channels To and Deleting Channels From
the Scan List

1.

SCAN must be off to add channels or delete
channels from the Scan list.  If the "SCN" status
indicator is on, press the "S" button to turn SCAN
off.

2.

Select the desired channel to be added to or
deleted from the Scan list.

Summary of Contents for PCS













































Reviews:

No comments