Technical Description
5.2
Configuration Management
The configuration can be managed locally and from the O&M center provided
that the DCN is set up. The following list gives examples of configuration areas:
•
Transmission interface parameters
•
Traffic routing
•
Traffic protection, such as 1+1 E1 SNCP, MSP 1+1
•
DCN parameters, such as host name, IP address
•
Security parameters, such as enabling telnet, adding new SNMP users
•
Radio Terminal parameters, such as frequency, output power, ATPC and
protection
5.3
Performance Management
5.3.1
General
MINI-LINK TN R4 supports performance management according to ITU-T
recommendation G.826.
The following performance counters are used for the E1 and STM-1 interfaces:
•
Errored Seconds (ES)
•
Severely Errored Seconds (SES)
•
Background Block Error (BBE) (only structured interfaces)
•
Unavailable Seconds (UAS)
•
Elapsed Time
The performance counters above are available for both 15 minutes and 24
hours intervals. The start time of a 24 hours interval is configurable.
The following counters are stored in the NE:
•
Current 15 minutes and the previous 96x15 minutes
•
Current 24 hours and the previous 24 hours
Specific information on performance management is also available as listed
below:
•
Performance counters for Ethernet traffic are described in Section 3.7.3
on page 38.
110
12/221 02-CSH 109 32/1-V1 Uen A 2008-03-14
Summary of Contents for MINI-LINK TN R4 ETSI
Page 1: ...Technical Description MINI LINK TN R4 ETSI MINI LINKTM ...
Page 12: ...Technical Description 8 12 221 02 CSH 109 32 1 V1 Uen A 2008 03 14 ...
Page 128: ...Technical Description 124 12 221 02 CSH 109 32 1 V1 Uen A 2008 03 14 ...
Page 144: ...Technical Description 140 12 221 02 CSH 109 32 1 V1 Uen A 2008 03 14 ...
