Ericsson MINI-LINK AMM 1U-1, Installation Manual

Page: 40 / 56

MINI-LINK High Capacity Indoor Installation Manual
5.6.2 Inserting the Plug-in Units
1. Open the front panel of the AMM. Remove the front panel during insertion if
the lowest position in the AMM is used.
4617
Figure 35 Removing the protective caps
2. Remove the protective caps from the positions to be used.
4619
A
B
Figure 36 Loosening the screws on the plug-in unit
3. Loosen the two screws on the plug-in unit until the groove under the head
of the screw is in alignment with the face of the plug-in unit A .
4. Insert the plug-in unit in the AMM.
Note: Make sure the arrow on the side of the AMM and on the plug-in
unit points upwards B .
34
EN/LZT 712 0156 R1A 2002-10-01