Ericsson IP Vision Dialog 4425 User Manual Download Page 83

Page: 83 / 136

Dialog 4425 IP Vision

Settings

Language

You can change the display menu language and keypad character

map. Available languages are listed when the language menu is

selected. The phone must be logged on to change the language.

Note:

If the chosen language is not supported by your

telephone system, text sent from the system will continue to

be in English. Only text displayed from the phone itself will

be in the chosen language.

Change display menu language (default=English)

Select

Settings

in the top menu (see display).

Press (see display).

Repeat until the

Language

menu is framed.

Select

Press (see display).

Display menus

is framed.

Select

Press (see display).

The current language is framed and marked (English is default).

Press until the desired language is framed (see display).

Note:

The menu key

Cancel

can be used to leave the

menu without saving the changes.

Select

Press to store the framed language (see display).

The display language is changed. The acknowledgement tone is

heard.

Exit

Press to return to the previous menu (see display),

Note:

The word

Exit

is displayed in the selected language.

press to return to idle mode.

Settings

CallList

Contacts

CorpDirectory

Web

Display Menus

English

Francais

Deutsch

Espanol

Cancel

Summary of Contents for IP Vision Dialog 4425









































































































































Search results

Summary of Contents for IP Vision Dialog 4425

Reviews:

Related manuals for IP Vision Dialog 4425

Brands by name

Popular brands

Ericsson IP Vision Dialog 4425, User Manual

Search results

Summary of Contents for IP Vision Dialog 4425

Reviews:

Related manuals for IP Vision Dialog 4425

Brands by name

Popular brands