Ericsson DUAL FORMAT MDR, Installation Manual, Page: 15 / 28

Figure 5 - Mounting Bracket Installation
POSITIVE LATCH HANDSET HOLDER WITH SWIVEL
(KRY 105 044)
Mount the handset holder in a location convenient to the operator where it will
not interfere with the safe operation of the vehicle or be a hazard to the vehicle
passengers. The positive latch handset holder is designed to be mounted in any
position using the adjustable mount. The positive latch mechanism prevents the
handset from being easily dislodged. The handset holder and the included mounting
hardware are shown in Figure 6.
14
Figure 6 - Handset Holder And Mounting Hardware
NOTE
If mounting on a surface covered with carpet, punch holes with a small
punch then make a small slit in the carpet, insert a short piece of metal
tubing and drill through the tubing.
Use the following procedure to mount the handset holder:
1. Use the hanger as a template to mark the screw locations and drill the small
pilot holes.
2. Use the four #8-18 x 3/4" or #8-18 x 1-1/2 self-tapping screws (items 2 in
Figure 6) to mount the holder.
NOTE
If mounting to a plastic or thin metal surface or using existing holes, use
the sheet nuts (item 3 in Figure 6) on the underside of the holes. Drill a
larger hole to permit the screws to turn freely when using these sheet nuts.
15