Ericsson C3 MAESTRO LBI-39101 Installation And Setup Download Page 9

LBI-39101

9

AUDIO

SYSTEM BD.

POT NO.

ENHANCED AUDIO ENCLOSURE AUDIO CIRCUIT LOCATED IN /

ADJUSTS *

TYPICAL
SETTING

**

12

Line 2 Input

Adjusts level of line 2 input audio from CIM line 2 output. Affects audio level to
unselect audio output devices such as unselect speaker 1 and unselect recorder.

125

17

Line 3 Input

Adjusts level of line 3 input audio from CIM line 3 output. Affects audio level to
unselect audio output devices such as unselect speaker 2 and unselect recorder.

125

18

Line 4 Input

Adjusts level of line 4 input audio from CIM line 4 output (from radio). Affects audio
levels applied to unselect audio output devices such as unselect recorder and, if a third
unselect speaker is employed, unselect speaker 3. If a Call Director is employed,
adjustment affects audio to Call Director telephone line and unselect recorder. Primary
line 4 adjustment. Also see pots 2 and 20.

125

20

Auxiliary Input

Adjusts level of line 4 input audio from CIM line 4 output (from radio). Affects audio
levels applied to select recorder, and  all speakers during Call Director patch
operations. Secondary line 4 adjustment used only if console is equipped with a Call
Director. Also see pot 18.

114

27

N/A (pot not used)

127

15

Line 1 Output

Adjusts level of line 1 output audio to CIM line 1 input.

40

16

Line 2 Output (adjustments never required)

40

13

Line 3 Output  (adjustment  never required)

40

14

Line 4 Output

Adjusts level of line 4 output audio to CIM line 4 input. Affects audio level to patched
radio during Call Director patch operations. Also see pot 1.

40

21

Select Recorder Output

Adjusts level of audio applied to the select recorder.

175

19

Select Audio Output

Adjusts level of audio at an internal Enhanced Audio Enclosure reference point on
Audio System Board. Affects select speaker, select recorder, operator headset earphone
and supervisors headset earphone audio levels.

190

29

Select Speaker Output

Adjusts level of audio applied to the select speaker. This pot is not used as a volume
control.

128

30

Unselect Speaker 1 Output

Adjusts level of audio applied to the  first unselect speaker (unselect speaker 1). This
pot is not used as a volume control.

128

Summary of Contents for C3 MAESTRO LBI-39101







































Reviews: