manualshive.com logo in svg

Ericsson Base Station F800, Field Service Manual

Share
Download
Ericsson Base Station F800 Field Service Manual Download Page 120

 

 

 

 

 

Error! Unknown switch argument.

2 (3)

 

Datum - 

Date

 

Rev 

Nr - 

No.

 

 

Error! 
U k

Error! 
U k

Error! Unknown 

i h

 

 

 

 

 

 

 

 

 

Error! Unknown switch argument.

 

 

Overview 

The F800 base station is suitable for any general base- or repeater 
application outside the Ericsson system product range. To simplify connecting 
the F800 to other applications than Ericsson applications, a special ”OEM-
connector” is mounted on the rear side of the F800. This connector together 
with the normal control line connector forms the OEM interface and holds any 
signals that will be needed for external control equipment.  

Configuration 

Besides the standard F800 simplex or duplex, the OEM model should be 
equipped with the ”OEM cable kit” which includes the OEM connector.  

Options 

To extend the functions of F800 OEM the following options can be added: 

  ”MRS5000 cable kit” which will give the F800 a 600 ohms floating input 

and output, 4-wire line interface. The ordinary modular RJ 6/4 connector is 
used for this. 

  ”255 channel kit” which will give the F800 the possibility of extending its 

normal 15 channels to 255 different channels or frequency pairs. The 
channel setting is controlled by the external control equipment via the OEM 
connector. If the external control equipment does not include any signals to 
control the channel settings this can be done by two internal channel 
switches on the back plane board inside the F800. 

Summary of Contents for Base Station F800





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands