manualshive.com logo in svg

Ericsson A1018S, Trouble-Shooting Instruction, Page: 28 / 42

Share
Download
Ericsson A1018S Trouble-Shooting Instruction Download Page 28

A1018s/A1018sc Standard Electrical Repair

4/00021-2/FEA 209 544/16.B

28

(42)

8  Keyboard

8.1  Type of keyboard fault.

Insert a SIM card and attach a fully charged battery. Start the phone using the On/
Off-button. If the phone doesn´t start at all, proceed to chapter 3 (“Doesn´t start”-
fault).

Press all keys and verify which one that doesn´t start.

The easiest way to do the verification is as follow:

•

Go to Menu/Settings/Key sound and choose “Click”.

•

Press the keys "1", "2", "3"... ..."*"," 0" ," #". You should hear a click sound and
see the responding figure in the display when pressing each key. Then press
"Yes", "No", "Clr", "<" and" >". When pressing "Yes" the phone tries to connect
a call, press "No" and the phone should stop connecting a call. Press "<" or " >"
and you scroll the menus and "Clr" clears the display from the figures that came
up.

Open the phone and check for liquid damages, especially around the faulty keys.

Clean the keyboard pads thoroughly and assemble the phone with a new keyboard.
Check if the keys are working according to the test above.

•

If a complete row or a complete column (according to fig. 8.1) is faulty, proceed
to section 8.2.

•

If only some keys are faulty, proceed to section 8.3.

Summary of Contents for A1018S











































Reviews:

No comments