Ericsson 344A3072P1 Operator'S Manual Download Page 23

WARRANTY

A

Ericsson Inc. (hereinafter "Seller") warrants to the original purchaser for use (hereinafter "Buyer") that
Equipment manufactured by Seller shall be free from defects in material, workmanship and title, and
shall conform to its published specifications. With respect to any Equipment not manufactured by Seller
)except for integral parts of Seller’s Equipment to which the warranties set forth above shall apply).
Seller gives no warranty, and only the warranty, if any, given by the manufac- turer shall apply. Batteries
are excluded from this warranty but are warranted under a separate Nickel- Cadmium Battery Warranty.

B

Seller’s obligations set forth in Paragraph C below shall apply only to failures to meet the above warran-
ties (except as to title) occurring within the following periods of time from date of sale to the Buyer and
are conditioned on Buyer’s giving written notice to Seller within thirty (30) days of such occurrence.
1. for fuses, incandescent lamps, vacuum tubes and non-rechargeable batteries, operable on arrival

only

2. for parts and accessories (except as noted in B.1) sold by Seller’s Service Parts Operation, ninety

(90) days.

3. for all other Equipment of Seller’s manufacture, one (1) year.

C

If any Equipment fails to meet the foregoing warranties, Seller shall correct the failure at its option (i) by
repairing any defective or damaged part or parts thereof, or (ii) by making available at Seller’s factory
any necessary repaired or replacement parts. Any repaired or replacement part furnished hereunder
shall be warranted for the remainder of the warranty period of the Equipment in which it is installed.
Where such failure cannot be corrected by Seller’s reasonable efforts, the parties will negotiate an equi-
table adjustment in price. Labor to perform warranty service will be provided at no charge only for the
Equipment covered under Paragraph B.3, and only during the first three (3) months following the date of
sale to the Buyer. Thereafter, labor will be charged at prevailing rates. To be eligible for no-charge labor,
service must be performed by an Authorized Service Center or other Servicer approved for these pur-
poses either at its place of business during normal business hours, for mobile or personal equipment, or
at the Buyer’s location, for fixed location equipment. Service on fixed location equipment more than
thirty (30) miles from the Service Center or other approved Servicer’s place of business will Include a
charge for transportation. Equipment located off-shore is not eligible for no-charge labor.

D.

Seller’s obligation under Paragraph C shall not apply to any Equipment, or part thereof, which (i) has
been modified or otherwise altered other than pursuant to Seller’s written instructions or written approval
or, (ii) is normally consumed in operation or, (iii) has a normal life inherently shorter than the warranty
periods specified in Paragraph B, or (iv) is not properly stored, installed, used, maintained or repaired.
or, (v) has been subjected to any other kind of misuse or detrimental exposure, or has been involved in
an accident.

E

The preceding paragraphs set forth the exclusive remedies for claims (except as to title) based upon
defects in or nonconformity of the Equipment, whether the claim is in contract, warranty, tort (including
negligence), strict liability or otherwise, and however instituted. Upon the expiration of the warranty pe-
riod, all such liability shall terminate. The foregoing warranties are exclusive and in lieu of all other war-
ranties, whether oral, written, expressed, implied or statutory. NO IMPLIED OR STATUTORY
WARRANTIES OP MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE SHALL APPLY.
IN NO EVENT SHALL THE SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPE-
CIAL, INDIRECT OR EXEMPLARY DAMAGES.

This warranty applies only within the United States.

1-800-528-7711 (Outside USA, 804-528-7711)

Summary of Contents for 344A3072P1

























Reviews: