IMPORTANT SAFETY INFORMATION
1.
SAVE THIS MANUAL - It contains important
safety and operating instructions.
2.
Before using the product, please follow and adhere
to all warnings, safety and operating instructions
located on the product and in the manual.
3.
DO NOT expose product to rain, snow or other
type of moisture.
4.
Care should be taken so objects do not fall or liq-
uids do not spill into the product.
5.
DO NOT expose product to extreme temperatures.
6.
DO NOT use auxiliary equipment not recom-
mended or sold by the manufacturer. To do so may
result in a risk of fire, electric shock or injury to
persons.
7.
To reduce risk of damage to electrical cord, pull by
plug rather than cord when disconnecting unit.
8.
Make sure the cord is located so it will not be
stepped on, tripped over or otherwise subjected to
damage or stress.
9.
An extension cord should not be used unless abso-
lutely necessary. Use of an improper extension
cord could result in a risk of fire and electric
shock. If an extension cord must be used, make
sure:
a.
That pins on the plug of the extension cord are
the same number, size and shape as those of
the plug on the power supply.
b.
That the extension cord is properly wired in
good condition, and
c.
That the wire size is large enough for AC am-
pere rating of unit.
10.
DO NOT operate unit with a damaged cord or plug
- replace them immediately.
11.
DO NOT operate this product in an explosive at-
mosphere unless it has been specifically certified
for such operation.
12.
To reduce risk of electric shock, unplug unit from
outlet before attempting any maintenance or clean-
ing.
13.
DO NOT operate this product with covers or pan-
els removed. This unit does not contain any user
serviceable components.
14.
Use only fuses of the correct type, voltage rating
and current rating as specified in the parts list. Fail-
ure to do so can result in fire hazard.
15.
GROUNDING AND AC POWER CORD CON-
NECTION - To reduce risk of electrical shock use
only a properly grounded outlet. The unit is
equipped with an electric cord having an equip-
ment - grounding conductor and a grounding plug.
Be sure the outlet is properly installed and
grounded in accordance with all local codes and
ordinances.
16.
DANGER - Never alter the AC cord or plug. Plug
into an outlet properly wired by a qualified electri-
cian. Improper connection or loss of ground con-
nection can result in risk of an electrical shock.
17.
The Model 19A149979P2 is for use on a circuit
having a nominal rating of 230 Vac and is factory
equipped with a specific electric cord to permit
connection to an acceptable electric circuit. A plug
meeting local electrical codes must be supplied by
the customer. Make sure the unit is connected to an
outlet having the same configuration as the plug.
No adapter should be used with this unit.
A ferroresonant power supply is designed to
work specifically at a given frequency. The 60
and 50 Hz supplies should be used at their
nominal frequency
±
2 Hz.
NOTE
LBI-38551
4
Summary of Contents for MASTR II 19A149979P1
