Ericsson GE MASTR II 19A149979P1, Maintenance Manual

Page: 3 / 18

SPECIFICATIONS*
OUTPUT VOLTAGE
Transmit and Receive Simultaneously 26.0 Vdc
±
1.0 Vdc @ 15 Amps (F801A)
13.0Vdc
±
0.5Vdc @ 3Amps (J801)
Receive only Vdc @ 3 Amps (J801)
INPUT VOLTAGE 121 Vac
±
20% (60 Hz version)
230 Vac
±
15% (50 Hz version)
INPUT FREQUENCY 60 Hz
±
2 Hz (60 Hz version)
50 Hz
±
2 Hz (50 Hz version)
NOTE: For every + 1.0% change in the input frequency, the output voltage will not vary
more than + 1.6% from the output voltage measured at the nominal input line frequency.
INPUT LINE SURGE PROTECTION 150 V rated MOV (60 Hz version)
275 V rated MOV (50 Hz version)
DUTY CYCLE
For 0-18 Amp output 100% (Continuous Duty)
OUTPUT VOLTAGE RIPPLE < mV p-p @ 25°C
< mV p-p @ -30°C
OUTPUT TRANSIENT RESPONSE
Overshoot Not to exceed 30 Volts (F801A)
Undershoot Not less than 22 Volts (F801A)
EFFICIENCY 70% @ rated TX/RX load current and nominal line voltage
FUSE CAPABILITY
Input 10 Amp (60 Hz version)
(2) 5 Amp (50 Hz version)
Output 5 Amp (Low Current Port)
20 Amp (High Current Port)
DIMENSIONS (HxWxD) 5.25" x 19" x 10.35"
WEIGHT 45 lbs.
OPERATING ENVIRONMENT -30°C To + 60°C
* These specifications are intended primarily for the use of the service personnel.
LBI-38551
3