Erica Synths SONIC POTIONS LXR EURORACK, Owner'S Manual, Page: 5 / 27

3.4. VOICE PARAMETER MENU SECTIONS
The synthesis parameters of each voice can be altered in voice EDIT mode. The
synthesis engine is grouped into 7 different sections that can be selected with the
DRUM + SELECT buttons. In this section each of those 7 menu pages and their
parameters are described.
OSCILLATOR PAGE (OSC)
Provides access to the main oscillator parameters. Frequency and waveform of the
main oscillator can be set here.
OSCILLATOR OSCILLATOR
OSCILLATOR
VOL EG
FILTER
AMP
DISTORTION
SAMPLERATE
REDUCER
TRANSIENT
GENERATOR
OSCILLATOR OSCILLATOR
OSCILLATOR
VOL EG
FILTER
AMP DISTORTION
SAMPLERATE
REDUCER
TRANSIENT
GENERATOR
PITCH EG
VOL EG
OSCILLATOR AMP DISTORTION
SAMPLERATE
REDUCER
TRANSIENT
GENERATOR
FILTER NOISE
3.1. SNARE VOICE (VOICE 4)
This voice is good for snare-drum and clap sounds. A noise source and a
pitched oscillator can be mixed. Only the noise source is routed trough the filter.
There is no FM capability on this voice.
3.3 HIHAT VOICE (6)
The hihat voice is nearly identical to the Cymbal voice, but it offers 2 different decay
times for the amplitude envelope. The voice is shared between voices 6 and 7, each
using one of the 2 available decay times. This allows to play open and closed hihats.
The closed hat (voice 6) will choke the open hat (voice 7).
3.2. CYMBAL/CLAP (VOICE 5)
This voice uses a 3 operator FM to generate the sound. The main oscillator is
modulated by 2 modulation oscillators. It's great for metallic and noisy sounds!
LXR EURORACK MODULE OWNERS MANUAL 5