Ergotron WorkFit-B, Manual, Page: 4 / 15

888-24-228-G-00 rev.C • 10/13
4 of 15
A B C
1
2
3
4
1x
1x
1x
2x
Ø 1/8" (3 mm)
Ø 5/32" (4 mm)
Ø 1/4" (6.5 mm)
Ø 15/32" (12 mm)
14mm
16x
4x
M2.9 x 7mm M2.9 x 7mm
1x
ST3.9 x 16mm
#12-14 x 5/8”
TEMPLATE FOR
WorkFit-B, LD
Temporarily adhere Template to bottom
of worksurface and drill holes as specified.
Refer to installation instructions for
attachment of the brake release.
777-24-040-G-00 rev.A 04/13
7.91”
(201 mm)
2.38”
(60.5 mm)
7.09”
(180 mm)
1.30”
(33mm)
1.30”
(33mm)
1.57”
(40mm)
2.38”
(60.5 mm) 1.56” (39.5 mm)
0.22” (5.5 mm)
0.49” (12.5 mm)
1.57”
(40mm)
3.15”
(80 mm)
3.90”
(99 mm)
4.37”
(111 mm)
For RECTANGULAR
work surfaces:
Place this mark
13.15” (334mm)
from the front of
the worksurface
For NON-RECTANGULAR
work surfaces:
Place this mark
18.9” (480mm)
from the back of
the worksurface
6.14”
(156 mm)
2.24”
(57 mm)
3.94”
(100 mm)
3.54”
(90 mm)
3.27”
(83 mm)
3.15”
(80 mm)
16x Ø 4 mm x 10 mm Deep (Ø 5/32” x 3/8” Deep)
4x Ø 6.5 mm Through
1x Ø 12 mm Through
5x WorkFit PD Accessory Mounting Holes
1x Ø 3 mm x 10 mm Deep (Ø 1/8” x 3/8” Deep)
4.06”
(103 mm)
CENTER OF
MOUNTING
PLATE
FRONT OF
WORKSURFACE
3.19”
(81 mm)
4.66”
(118 mm)
1. Center this mark from side-to-side.
2. For RECTANGULAR work surfaces:
Place this mark 13.15” (334mm) from
the FRONT of the worksurface.
3. For NON-RECTANGULAR work surfaces:
Place this mark 18.9” (480mm) from the
BACK of the worksurface.
部件
需要的工具