INSTRUCTIONS / NOTICE D’INSTRUCTION
Doc. N°
Rev.
1
Sheet
Feuille:
3
of
de
37
Title / Titre:
2.
IDENTIFICATION
This document is the
HAPO’s
(physical assistance device) instruction manual. It contains all the necessary information
from its reception to its end of life.
Read the entire manual before installing the HAPO for the first time.
2.1
REFERENCE DOCUMENTS
•
ANALYSIS AMDEC_HAPO17122019
•
ANNEX AT CONFORMITY EVALUATION _HAPO
3.
ABBREVIATIONS AND DEFINITIONS
HAPO
Posture Harness
PAD
Physical assistance device
Passive
Without storage or external power supply.
4.
GENERAL PRESENTATION
The system described is a passive, spring-loaded physical assistance device. This equipment is worn by an operator
and transfers partly the upper-body forces, by a chest support, to the thighs resting on the lumbar hollow. This device
supports the upper-body bending and inclination during handling of loads.
4.1
EQUIPMENT IDENTIFICATION
An equipment identification label is affixed to the device. You find it in the belt on the lumbar plate. This way, a unique
number identifies it.
•
Access to the identification label:
o
Pull the fastener on, on the outside
of the belt:
Table 1
Figure 1