Ergon BA2, User Instructions

Page: 19 / 32

20 ERGON BIKE ERGONOMICS
EN
Mounting the Battery
Completely open the main compartment and fold the pocket
pouch upwards. Then loosen all three battery mount Velcro
straps and move them outwards. Slightly turn the battery
mount outwards and insert the battery
(Fig. 1 and 2) . Put the
middle Velcro strap across the battery (if necessary, through
the handle opening) and close it on the back
(Fig. 3)
.
Fold the mount back into the backpack and close the other
two Velcro straps across the mount
(Fig. 4).
Using the E-bike Battery and the Reservoir at the
same Time
Transporting a battery and the BH300 reservoir at the same
time is not possible. Instead, we recommend fixing the smaller
BH150 model to the mount provided at the top of the hydration
reservoir compartment. Only fill up the BH150 reservoir
to 80%.
Pack the battery in the main compartment after the reservoir to
make stowage easier.
The integrated battery compartment enables the safe transport
of removable e-bike batteries. Three adjustable Velcro straps
fix the battery in all directions and enable adjustment to
different shapes and sizes.
Battery Compartment (only BA3 E and BA3 E Protect)
Fig. 1 Fig. 2 Fig. 3
Side
Front
Fig. 4
BA
TT
ERY
BA
TT
ERY
B
AT
TE
RY
CB
Transport an e-bike battery only
when using a protector at the
same time. Make sure you follow
the notices on page 18!
Since there are numerous e-bike batteries in the market,
100% compatibility cannot be guaranteed for all makes.
The backpack is water-repellent but not waterproof!
We recommend packing the e-bike battery separately.
Before setting off, ensure the e-bike battery has been
fixed so that shaking is prevented as much as
possible, and that all Velcro straps are closed.