8
9
emergency battery backup pack
Store the battery pack in a convenient location for emergency use.
(4) 9 Volt batteries are required to operate the power down feature and are NOT included.
For emergency use only, in case of a power outage.
In the event that the base is stuck in an articulated position during a power outage- the Battery
Backup Pack will return the base to a flat position. Batteries are not to be used for normal
operation of the base.
Remove the battery pack after the emergency is over, as the system will continue to draw
power from the batteries, even if not in use.
Install the 9 volt batteries into the provided battery pack.
Do not mix brand name batteries.
Connect battery pack to input power cord attached to
control box.
If the base is in the upright position use the remote to return
to a flat position.
OVERVIEW
STEP 2
STEP 1
Input
Power Cord
Control Box
Battery Pack
Connecting straps are secured to the base frame upon delivery.
If a split setup is being installed, plastic connecting straps are provided (one per base) to
secure the bases together. Use both straps to secure the head and foot portions together.
With the bases in their desired location, slightly loosen both
legs to allow the strap to fit on the leg bolt, between the leg
washer and frame.
Slide side (a) of the connecting strap onto leg bolt. Swing the
strap and connect side (b) to the leg bolt. Secure the strap
by shifting to the left.
Re-tighten legs. Do not over tighten. Use the remaining strap
and repeat on other end of the base.
OVERVIEW
STEP 2
STEP 1
STEP 3
connecting strap (optional)
a
b
