10
To use the Puck Voice Activated System, simply say the invocation
command you chose during setup, either “
HELLO ERGO
” or “
HELLO
MOTION
”, and wait 1-2 seconds for the microphone to activate. Once
the microphone is activated, indicated by the blue light, it will be
active for 8 seconds. While the microphone is active you can now use
any of the voice commands listed below to control your adjustable
base. If no command is heard within 8 seconds, the Puck will enter
“sleep mode” and the microphone will be deactivated.
WAKE UP DEVICE
offline voice control puck with wireless charger
Remove The Puck from the box.
Please take a minute to familiarize yourself with the voice commands
listed on the next page.
Use the remote control to lift the
HEAD to the maximum angle.
Locate the connector secured to the corner of the frame and
connect it with the Puck Voice Control plug as shown in the picture.
Step 2
Step 1
Step 3
Step 4
Step 5
Follow the installation steps below to setup The Puck device.
The Puck Voice Control will arrive in the
Off position and you will need to activate
the Puck by selecting an invocation
command of your preference.
Use the slider switch on the back side of
the Puck to select the invocation phrase
you wish to use, either “
HELLO ERGO
” or
“
HELLO MOTION
”.
Note:
If you have a split base, each side
must have a different invocation phrase
in order to work independently.