18
Connect your headboard to the attachment plate using the
remaining long screws or hardware that came with your
headboard. The heads of the bolts will face outward. Use hex
key to tighten bolts.
headboard bracket installation guide (optional)
STEP 1
STEP 2
STEP 3
a .) Measure the distance between the mounting holes on the
headboard and install the T-Bracket to accommodate the
headboard .
b .) To install the T-Bracket, slide the T-Bracket through the end
of the headboard bracket . Align the flat side of the T-Bracket
plate to the mounting holes on the headboard .
c .) Secure T-Bracket in place by inserting two short screws
through top of bracket . Use hex key to tighten screws .
Headboard Brackets are an optional accessory and are not included.
A hex key is included with the accessory kit to complete installation.
a .) Align the hole in the bracket to the brass sleeve into which the leg
threads . Hold the bracket in place and screw the leg into the base
until it is snug .
DO NOT OVERTIGHTEN
.
Too much force may cause
the leg to spin freely .
b .) Align the tab with the hole in the frame (located towards the foot of
the base) and use a short bolt, washer and wingnut to secure the
bracket . Make sure the bolt is tight .
Summary of Contents for Motion Air
Page 33: ...31 notes...
