ergoline INSPIRATION 400 SUPER POWER, Operating Instructions Manual, Page: 131 / 168

Cleaning and maintenance
46
– Remove the partition.
The assembly is the same process in reverse order.
When assembling please note:
– Clean the partition.
– Hold the partition with a cloth in order to prevent finger prints.
5.7.2 Remove the canopy panel
– Undo the screws. Remove the outside screws first and then remove the
screws in the middle.
– Support the canopy panel with one hand so that it does not fall down.
– Carefully lay the canopy panel aside.
The canopy panel must be completely removed from the device in order to
replace the lower, long, low pressure UV lamps.
– Undo the cable ties and unplug the connectors.