ergoline INSPIRATION 400 SUPER POWER, Operating Instructions Manual, Page: 127 / 168

Cleaning and maintenance
42
Component Interval Activity See page
After each tan
ni
ng s
ess
io
n
Wh
en
ne
ce
ssary
50 h
1 Acrylic glass panel X Clean and disinfect 40
8 Adjustable air nozzles X Clean and disinfect 40
9 Control panel X Clean and disinfect 40
Handle X Clean and disinfect 40
Protective goggles X Clean and disinfect 40
MP3 cable X Clean and disinfect 40
2 Condensation tank X Empty 56
4, 10 Surfaces X Clean 40
5 Air intake openings X Clean 55
6 Body cooling air nozzles X Clean 40
7 Nozzle AQUA FRESH AROMA system X Clean 40
3 Filter X Remove and clean filter 54
5 Filter X Remove and clean filter 55
11, 12 Filter X Remove and clean filter 56
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
5.5 Maintenance
Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Voreinstellungen/Presettings', Order-No. 1008953-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (Order-No. 1010363-..).