ergoline ergoselect 4, Operator'S Manual

Page: 48 / 96

9 Control Terminal T
46 ergoselect 4 / 5
9 Control Terminal T
9.1 Turning the System On
You turn on the ergometer by pressing the power switch
(toggle switch[ I / 0 ]).
Note
• Instruct the patient not to pedal while the
ergometer is being turned on and during the
self­test.
• Apply the blood pressure cuff to the patient AFTER the
ergometer has been turned on and the self­test completed.
• The device can be configured to default to one of the
operating modes.
If this option is selected, the start screen of the selected
operating mode (e.g., Ergometry) will be displayed instead
of the main menu.
Figure 9 – 1: Control terminal T
The ergometer runs a self-test. Subsequently, the main
menu displays.
Figure 9 – 2: Self-test screen
The ergometer software is controlled from the touch panel.
PC Mode
Ergometry
Training/Test
Manual
Setup
Figure 9 – 3: Main menu