- 35 -
↑
12
↓
↑
↓
t
raininG
Cardiologic training sessions can be performed with er‑
goselect ergometers equipped with control terminal K.
For a detailed description of the protocols, please refer to
the Appendix.
Pressing the "Training" key will display the training proto‑
col used last.
Press the "Start" key to re‑start the protocol, or press the
"Select" key to display the protocol parameters or to switch
to another training protocol.
All training protocols 1 ‑ 10 are user‑configurable. (see
"Settings for Control Terminals K").
Use the arrow keys to display the protocol to use and the
corresponding parameters. Confirm the selection with the
"Select" key.
You initiate the training session with the "Start" key.
The display changes to the training session screen, where
load and heart rate are represented both by numeric values
and by waveforms.
When the basic load appears on the display (after approx.
15 seconds or upon termination of the blood pressure
measurement) and the patient's RPM indicator blinks, the
patient should start pedalling.
The internal protocol will now control the entire training
session ‑ the display always indicates the current values.
i
nitial
sCreen
of
the
training
session
Training No.1 Pulse
Saddle
Saddle
Start
Select
Make settings
Training No. 1 Pulse
Basic Load
25 Watt
Warmup
2 min
Training time
20 min
Recovery Load
20 Watt
Recovery Time
3 Watt
Load increment
8 Watt/min
Training pulse
100 P/min
Maximum load
80 Watt
Select
Select protocol
Training running
D
isplay
During
exerCise
test
1
most recent BP value (systolic/diastolic pressures) or cuff
pressure during inflation
2
heart rate (BPM)
3
duration of exercise test (minutes:seconds)
4
current load in watts
5
pedal speed (RPM)
s
eleCting
the
training
protoCol
