7
3.
Mount the foot plate into the
corresponding holes on the base. (Fig.
1.6D)
Fig. 1.6D
4.
Assembly the actuators piston rod to
the lifting arm. Use the Allen key and
the spanner to tighten the bolt/nut.
(Fig. 1.6E). Put the cap on the nut.
Fig. 1.6E
5.
Assembly the handles on the mast with
two screws and tighten with the Allen
key. (Fig 1.6F).
Fig. 1.6F
6.
The hand control, lifting arm and
electrical leg spreader are connected to
the control box. (Fig 1.6G) See section
2.1 – functions / connection.
Fig. 1.6G
7.
Before first time use and after each
service check the control box must be
reset push up/down buttons
simultaneously on the hand control (Fig
1.6H). See section 3.2 – Using the
control box.
Fig. 1.6H
