ergolet Luna IPx4, User Instruction, Page: 11 / 24

11
2.4 Operation
The Luna is ready for use, when the Luna cassette and the spreader bar are correctly
mounted. Connect the hand control to the plug inlet on the front panel and test the
up/down functions before using the Luna.
The Luna will move faster when not loaded in order to reach the user quickly. When the
user is lifted the speed will automatically reduce to increase the comfort and safety for the
user.
2.5 Operation of safety functions
Emergency stop:
This function is only to be used in an emergency e.g. if the Luna does not react or does not
stop after releasing the hand control operation. The Emergency stop is placed on the hand
control and on the side foil. If the emergency stop has been activated all functions will stop
immediately and the LED light will show red on the hand control.
The Emergency stop can be deactivated by pressing the “Reset” button on the handset for
5 seconds.
Emergency lowering button:
This is also only to be used in an emergency where it is necessary to safely lower a user.
The emergency lowering button is placed on the hand control, illustrated as a parachute
and also on the side foil with 3 arrows.
To activate the emergency lowering hold the button on the hand control or on the front
panel for 5 seconds and a “beep” from the Luna sounds. This is a hold to run button.
Warning! The emergency lowering does not work if the hand control has a
defect.
Note! If the Luna is in “sleep”-mode press either the up or down button for
the emergency lowering to work.
When using emergency lowering, the normally stop will not be active!
Release the emergency lowering button, when the strap is in its full length.
!