ergolet Luna IPx4, User Instruction, Page: 10 / 24

10
2.3 Pictograms and functions
(1) ON – If LED is off Luna is in “sleep” mode.
The LED light will turn on when the button up
(4) or down (3) on the hand control is pressed.
Side foil :
(2) BATT. – Indicates the level of the battery
(see section 2.6).
(3) + (4) Up/Down – With a constant hold the
Luna will move in the desired direction.
Release the button to stop the movement.
Note : Works only with hand control (5)
plugged in and LED (1) must be on.
(5) Plug – Insert the hand control plug.
Hand control
:
(6) Data Plate – Information about the Luna
model, serial number and symbols
information.
(7) Emergency Lowering – ONLY used in
situations where it is necessary to lower a
client safely in a lift failure. This button must
be held constantly to lower the unit.
(See section 2.5)
Note : Works only with hand control (5)
plugged in and LED (1) must be on.
(8) STOP – Press the emergency stop button to
stop the Luna immediately. This function can
be reset by pressing the reset button on the
hand control for 5 seconds.
9) Reset – Used to reset the Luna after the use
of the emergency stop - or lock function. Reset
by holding the reset button for 5 seconds, the
Luna will them be reactivated.
Reset can also be used to lock all functions to
avoid unintended use by e.g. the client. When
the reset button is held, the LED light will
show red and all functions will be locked.
Deactivate as after an emergency stop
(10) Option – This option is not available on a
standard hand control. The extra output can
be for e.g. an electrical spreader bar.
(1) (2)
(3)
(4)
(5) (6) (7) (8)
(9)
(7)
(8)
(10)
(4)
(3)
(2)
(1)