Ergo 40DF5000, User Manual

Page: 75 / 92

CAUTION
.
6. Using the Remote Control
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3. Reattach the battery cover.
eries.
• Do not mix new and old batteries. This may result in creaking or leakage, which may pose a
e or lead to personal injury.
• Insert batteries according to (+) and (-) markings. Inserting the batteries incorrectly may result
in leakage, which ma e or lead to personal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the batteries away from children or pets.
• When the remote control will not to be used for an extended period, remove the batteries.
Operating the Remote Control
1 .Aim Remote Control directly at the Remote
Control Sensor on the right down corner of the TV
set.
2 .Remote Control range is at approx.16 feet with
angles of approx.30 degree.
3. Avoid obstructions between the Remote Control
and the sensor.
☼
If you do not intent to use the remote control for a
long time, remove the batteries.
☼
If the remote control does not operate correctly, or
if the operating range reduced,replace both batteries
with new ones
13
30 30
IR Receiver