ErGear EGESD1, Instruction Manual

Page: 3 / 28

Keep the pedestal vertical
to the column.
Secure the pedestals (1) to left column (2) and right column (3) using
bolts (A) and Allen key 13/64 in.(5x5mm) (C)
Loosen
Loosen the preassembled bolts on the
supporting beam (4) using Allen key (C), then
stretch the supporting beam according to the
size of your desktop
Install supporting beam to the left column
(2) and right column (3) using bolts (B)
and Allen key (C)
Secure transmission rod (5) to the left
column (2) and right column (3)
Do not exceed one third of the
circle when rotate the angle
13/64 in.(5x5mm)
Please adjust the support beam size(4)
according to table top size.
Tighten preassemble bolts on
supporting beam with Allen
key 4x4mm (C)
3/32 x 3/32 in.
(2.5x2.5mm)
Stretch the
preassembled
thinner rod and
insert the thinner
rod into the hole
on the left
column (2)
Loosen the
preassembled
nut
Rotate and
insert the other
end of
transmission
rod (5) to the
right column (3)
Tighten the nut
Tighten the
preassembled
bolt
Install pedestal(1)
Install supporting beam(4)
13/64 x 13/64 in.
(5x5mm)
5/32 x 5/32 in.
(4x4mm)
01 02 03 04 05
06 07 08 09 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25