ERECA Stage Racer Installation Manual Download Page 11 | Manualshive

Page: 11 / 15

ERECA Stage Racer Installation Manual Download Page 11

MI_STAR_EN.doc

SR Installation Manual EN

Indice : C

03/05/2019

11 / 15

ERECA SAS 75 rue d'Orgemont, 95210 SAINT GRATIEN France

Tel +33 1 39 89 76 23 www.ereca.fr

Each LED summarize the Input and Output signal activity on the corresponding channel.
Each

signal activity is also reported on the web browser “signal status” page.

Each differential input is not 120Ohms loaded internally for optimum compatibility with transmitted protocols.
If impedance matching is needed a small SFR16 resistor could be added directly on the D SUB pints
together with the signal wire.

The 12 extra RX 422 supported datarate of each signal is about 25Kbds. This option is totally independent
and do not affect the 2 standard serial interfaces.

Note: For RS 485 Telex/RTS talkback panels please ask ERECA for wiring tip.

Note: As the differential inputs are unloaded internally a small crosstalk should happen on the adjacent
channel only if it is unused and left floating.

«
...
9
10
11
12
13
...
»

Summary of Contents for Stage Racer
















Reviews:

No comments