4
CML International S.p.A.
WARRANTY
Every machine is carefully controlled and tested before shipment. Machine
installation is under customer’s responsibility, if qualified personnel is required for
assistance and training, the cost of the operation will be charged.
WARRANTY CONDITIONS AND RESTRICTIONS
1.
Each ERCOLINA bender has a 12 month warranty effective from delivery date,
against any component’s defect. The company reserves the right to request a copy
of the sale invoice.
2.
Defects must be notified to us within 2 months from the date the defect has been
found.
3.
Defects are checked on our premises, so every ERCOLINA® bender must be
sent, FREIGHT PREPAID, to our address or to authorised service centres. ANY
FREIGHT COLLECT DELIVERY WILL BE REJECTED. If checking at
customer’s premises is required, a cost for checking on site will be charged.
4.
Warranty includes the defective component’s replacement or repair excluding
labour cost.
5.
Electrical parts are not included in the warranty in case of incompatibility with
power supply ( caused by overvoltage and / or atmospheric events ).
6.
Operations performed under warranty do not extend warranty terms.
7.
Warranty does not respond to damages caused by wear.
8.
The warranty does not apply if damages are a result of incorrect handling or of a
use that does not conform with specifications described in this manual.
9.
The warranty does not apply if the machine has been modified or tampered with.
10.
The warranty certificate
IS INVALID
if dealer stamp with sales date is not
included at the bottom of the document and in the attached coupon. Furthermore,
the part to be sent to us must be mailed within 8 days following the invoice date.
11.
The buyer can not claim compensation for damages in any way.
