background image

C

Textile Strap x 1 

A

Screw (3,5mm x 16mm) x 1

Wedges x 2

B

Fittings and parts checklist

Wall fixing -

if in doubt seek professional advice

Wood 

If  fixing  to wood make sure 

that it isn't chipboard as 
screws can easily pull away 
from the core structure 

Brick  or Masonry 

Use an appropriate  wall plug 

provided you are sure your 
wall is sound

Cavity wall 

Special toggle wall plugas are 

needed. Seek expert advice

1.  Screw the textile strap on to the back edge of top panel of the item at centre point using short  screw provided. 

Position the item against the wall where you want it to go

2. Attach the textile strap 

using screws suitable for your type of wall, 

see  

Wall fixings 

above.

fig. 1

fig. 2

fig. 3

Page 2 of 4

Summary of Contents for Shalstone 80311506

Page 1: ...RE WHEN LIFTING to avoid personal injury and or damage to the product Please check the pack contents before attempting to assemle this product A full checklist of components is given in this leaflet If any components are missing please contact the retailer from whom you bought this product Pre assembly preparation Please ensure instructions are read in full before attempting to assemble this produ...

Page 2: ...rick or Masonry Use an appropriate wall plug provided you are sure your wall is sound Cavity wall Special toggle wall plugas are needed Seek expert advice 1 Screw the textile strap on to the back edge of top panel of the item at centre point using short screw provided Position the item against the wall where you want it to go 2 Attach the textile strap using screws suitable for your type of wall s...

Page 3: ...ding level use the wedges B provided Push a wedge under the corner of your cabinet until it becomes level fig 4 then snap it off as shown in fig 5 Finally tap any of the wedge still protruding out from under the furniture fig 6 A C fig 4 fig 5 fig 6 Page 3 of 4 ...

Page 4: ...g abrasive compounds acidic or caustic reagents and any bleaches containing oxidising reagents should be avoided as prolonged use may damage the lacquer surface Wipe up spills immediately If sticky marks occur on the surface they can be removed with a dilute solution of warm soapy water The offending area should be rubbed lightly and then completely dried immediately afterwards before replacing an...

Reviews: