Erco&Gener GENPRO 40E R2, User Manual

Page: 26 / 57

EG_GenPro40e-R2_1006_UG_001_UK.doc Page 26 / 57
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCOGENER reserves the right to make any modifications.
Dct_427_02
Use a communication software like for example Windows HyperTerminal
Set the COM port of the DTE as follows:
▪ Bits per second ....... : 115200 bps ,
▪ Data Bits .................. : 8 ,
▪ Parity ....................... : None ,
▪ Stop Bits .................. : 1 ,
▪ Flow control ............. : material.
After that, send the command
AT
↵
. In the window under HyperTerminal, the modem must reply
OK
.
In the case where no communication can be established with the modem:
▪ Check the USB connection between the DTE and the modem (DCE),
▪ Check the configuration of the COM port of the DTE.