EG_GenPro2xe_1003_UG_005_UK
Page 20 / 63
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Dct_427_00
4 Characteristics and Services
The GenPro 2xe is a class10 GSM/GPRS modem dedicated to asynchronous binary data transmission,
SMS and voice.
It may also have 3 inputs and 1 output
The characteristics of different GenPro 2xe are summarized in the table in paragraph 1.1
The available services are summarized in the table below.
Options / Accessories for Modem GenPro 2xe modem
22e
23e
Options *
- Back-up battery
X X
- Real-Time-Clock backup
X X
- Analog input (instead of opto-coupled input E2)
X
- Buzzer Output
X X
- External power 3.8V for GenBlue 15e
X X
- Bus One Wire
X
- Software development kit : cdrom SDK EGM
X X
Accessories
*
- Serial data cable - 15M/9F or Serial data cable / Audio- 15M/9F/RJ9
X X
- power supply 230 Vac - 12 Vdc
X X
- GSM (SMA-M) antenna
X X
- GenBlue 15e : Adapter Bluetooth® / RS232 auto-supplied
X X
* contact us
5 Using the modem
5.1 Starting with the modem
5.1.1 Mounting the modem
To mount the modem on a support, use the fixing brackets as described below
Fixing brackets
Note:
- Must be fixed on a flat surface
- Max. height of the screw head: 2 mm
The aluminum casing of the modem is connected to the 0V (GND) of the power supply and to
the 0V of the RS232 serial link. To avoid any risk of conduction of the ground plane to other
equipments,
The modem must be electrically insulated from its mechanical support.
