EG_GenPro15e_1103A6_IS_000_UK
Dct_425_01
The information and non contractual pictures in this document are given for indication purposes
only. ERCOGENER reserves the right to modify its products and documentation at any time.
4 Using the modem
4.1 Introduction
Before doing anything else, it is prudent to check that the modem is correctly configured
and that all the necessary operating components are present.
The modem is delivered in its own packaging, together with the present documentation,
1 cable (2-wires cable), and two fixing brackets.
4.2 Connection
It is recommended making all the connections with the unit un-powered.
Connection to the supply
The
GenPro 15e
must be connected to a DC supply by the supplied power cable.
Network connection
A GSM/GPRS antenna must be connected to the SMA-F connector.
DTE connection
A straight 15-pin / 9-pin cable, ERCO Ref. 4404000206 is used to connect to the DTE
via the V24 (RS232-C) connection
SIM card
Remove the SIM card cover.
Insert the SIM card (push/push mechanism)
Put the SIM card cover back.
4.3 Switching on
Switch the modem on.
See the documentation "User Guide" (EG_GenPro15e_1103A6_UG_xxx_yy) for more
information.
