Erbe ERBECRYO 2, Manual

Page: 12 / 112

12
4.4 Connecting and setting up the product
Connect the footswitch plug into the footswitch socket on the
rear of the unit. Secure the plug in place by tightening the lock
nut.
Place the footswitch on a level floor where it cannot tip over.
Do not allow the footswitch cable to stretch above floor level
(risk of tripping). Instead, lay it on the floor.
4.5 Conducting a performance test
Before every use conduct a performance test.
4.6 Function of the footswitch pedal
Use the white footswitch pedal to activate the ERBECRYO 2
freeze function.
5
Cleaning and disinfection
5.1 Safety instructions for processing
Do not exceed a temperature of max. 75 °C!
Erbe recommends wiping or spray disinfection with an appropri-
ate disinfectant. Comply with the disinfectant manufacturer's
stipulations as to its suitability and concentration.
Do not sterilize!
OBJ_DOKU-190376-005.fm Seite 12 Donnerstag, 26. November 2020 3:06 15