Erbe 20190-117, Notes On Use

Page: 15 / 146

15
5
Compatible devices
The electrode handle is to be connected to the Erbe electrosur-
gical unit with a 3 pin socket.
There are various Erbe adapters that are to be used for connect-
ing Erbe electrosurgical units with standard sockets (see chapter
6).
6
How to use
Use aseptic techniques when removing the product from the
packaging!
Pull the protective sleeve off the electrode. Ensure that the elec-
trode is firmly seated in the handle. If you change the electrode,
make sure that it is inserted fully into the handle.
Pull the securing collar off the electrode handle and cable.
When using electrode handle 20190-116:
• For connecting to an Erbe electrosurgical unit with 3-Pin re-
ceptacles: ATTENTION! Insert the HF connector of the elec-
trode handle into the HF output of the receptacle (see illus-
trations below). Never select another receptacle output as
this can damage the electrosurgical unit.
• For connecting to an Erbe electrosurgical unit with standard
receptacles: Use adapter Art. No. 20183-026.
• Footswitches are used to activate the handle. Press the yel-
low pedal to activate cutting mode. Press the blue pedal to
activate coagulation mode. Make sure that the electrosurgi-
cal unit responds correctly.
HF
VIO
HF
ICC
OBJ_DOKU-193550-006.fm Seite 15 Montag, 14. September 2020 3:14 15