Erbe 20150-100, Notes On Use

Page: 11 / 112

11
Checks other than those described in these instructions for use
do not need to be carried out.
If damaged, do not use this product!
Never lay this product on the patient or in his/her direct vicinity.
Protect this product from any form of mechanical damage! Do
not throw! Do not use force! If there is a cable, and unless stated
otherwise, do not kink it or wrap it around the accompanying
product!
Erbe Elektromedizin expressly warns against modifying the
product. Any modification exempts Erbe Elektromedizin from
any and all liability.
4
How to use
4.1 Only use cleaned and disinfected products
Clean and disinfect the product before using it for the first time
and before each subsequent use.
4.2 Check the product
The product, and in particular the connecting cable's insulation,
must be checked for damage before each use.
If damaged, do not use this product!
4.3 Connecting and setting up the product
Connect the footswitch plug into the footswitch socket on the rear
of the unit. Secure the plug in place by tightening the lock nut.
Place the footswitch on a level floor where it cannot tip over.
Do not allow the footswitch cable to stretch above floor level
(risk of tripping). Instead, lay it on the floor.
OBJ_DOKU-185853-007.fm Seite 11 Donnerstag, 5. April 2018 9:32 09