Erbauer ERB607CHR, Original Instructions Manual

Page: 12 / 16

automatically begin to charge the battery pack to the
highest capacity possible (the light will be green and
flash). If the light becomes solid red, the battery pack
is dead.
NOTE:
Repaired battery packs are still usable but
should not be expected to perform as much work as
new battery packs.
IMPORTANT CHARGING NOTES:
1. For a new battery or a battery that has been in
storage for sometime, please recharge the battery
before use. If you want to store the battery for a long
time, please fully charge the battery pack to ensure
maximum battery life.
2. Longer life and better performance can be
obtained if the battery pack is charged when the air
temperature is between (18
o
C-24
o
C). Do not charge
the battery pack in air temperatures below 4.5
o
C,
or above 40.5
o
C. This is important as it can prevent
serious damage to the battery pack.
3. Never freeze your charger or immerse charger in
water or any other liquid.
4. When the battery pack fails to produce sufficient
power on jobs that were previously done easily,
please recharge your battery, do not continue to use
under this condition. You may charge a partially used
pack whenever you desire with no adverse affect on
the battery pack.
5. When charging it is normal that the charger and
battery pack may become warm to touch.
6. If the battery pack does not charge properly:
a. Check current at power outlet by plugging in
another appliance.
b. Plug and unplug to check whether the charger is
ok
c. Check whether the battery has been damaged
d. Move the charger and battery pack to a
location where the surrounding air temperature is
approximately 18
o
C-24
o
C.
e. If the charging problem persists, take the tool,
battery pack and charger to an authorized service
center.
f. Under certain conditions, when the charger is
plugged into the power supply, the exposed charging
contacts inside the charger can be shorted by foreign
material. Foreign materials of a conductive nature