Erbauer ERB596CSW, Original Instructions Manual

Page: 7 / 24

2000W 235mm CIRCULAR SAW ERB596CSW
6. When an extension cable is required you must ensure it has
the correct ampere rating for your power tool and is in a safe
electrical condition. And please always fully unwind cable drum
extension to avoid potential overheating.
7. Ensure your mains supply voltage is the same as indicated on
the rating plate.
8. Before cutting, check the cutting line is free of nails, screws,
etc.
9. Only make cuts with the blade direction downwards, never
upwards or at the side.
10. Do not use a blade unless the rated blade speed exceeds the
saw no load speed.
11. Never remove the guard system. Never use the saw if the
guard system does not function correctly. Never lock the
moving guard open. The guard must move freely.
12. Never use saw blades made from high speed steel (HSS).
13. Always check walls, loors and ceilings to avoid hidden power
cable and pipes.
14. Do not cut material containing asbestos.
15. Do not use circular saw to cut tree limbs or logs.
16. Do not use metal or stone saw blades. Only use wood saw
blades.
17. Do not use circular saw to cut tree limbs or logs.
18. Do not use any abrasive wheels.
19. Use only blade diameter(s) in accordance with the markings.
Warning:
a. Keep hands away form cutting area and the blade. Keep
your second hand on auxiliary handle, or motor housing. If
both hands are holding the saw, they cannot be cut by the blade.
b. Do not reach underneath the work-piece. The guard cannot
protect you from the blade below the work-piece.
c. Adjust the cutting depth to the thickness of the work-piece.
Less than a full tooth of the blade teeth should be visible below
the work-piece.
d. Never hold piece being cut in your hands or across
your leg. Secure the work-piece to a stable platform. It