Erbauer ERB596CSW, Original Instructions Manual

Page: 18 / 24

SAFETY ON/OFF SWITCH
Your switch is locked off to prevent accidental
starting. Depress lock off button (16) then on/off
switch (2) and release lock off button (16). Your
switch is now on. To switch off, just release the on/
off switch.
HAND GRIP POSITION
Always hold your saw irmly with both hands when
operating. The right and wrong ways to support
large work pieces are shown in Fig.3-1 and Fig.
3-2.
DEPTH OF CUT ADJUSTMENT (See Fig.4-1, 4-2)
Lift up the depth adjustment lever(19) to loose it.
Hold the base plate at the rear position and lift up
the saw body until the blade is at the right depth.
Set the depth of cut using the scale (18) and push
the lever (19) down to lock. Always add 3mm to
your depth of cut so the blade can cut through the
material.
Fig. 3-1
Fig. 3-2
Fig. 4-2
RIGHT
WRONG
18
19
19
Fig. 4-1