Erbauer ERB561SRG User Manual Download Page 8

Switch the product off and disconnect it from the power supply before 

assembly, cleaning, adjustments, maintenance, storage and 

transportation.

Caution / Warning.

Read the instruction manual.

Wear hearing protection.

Wear respiratory protection.

Wear eye protection.

Wear protective clothing

Wear protective footwear. 

Wear protective gloves.

IP23

Protection against contact with the fingers, protection against solid 

foreign bodies with Ø > 23 mm as well as against splashed water from 

all directions

yyWxx

Manufacturing date code; year of manufacturing (20yy) and week of 

manufacturing (Wxx) 

SN

Serial number

Do not expose the product to rain or wet conditions.

Fluid and solvent can be highly flammable or combustible. Use the 

product only in well-ventilated area, and avoid any ignition sources, 

such as smoking, open flames and decrial hazard. Never point the 

product toward open flames!

Do not to direct the water jet onto people, animals, electrical 

equipment or onto the product itself.

Always ensure that other people and pets remain at a safe distance 

from the product when it is in operation. In general, children must 

not come near the area where the product is. 

The product complies with the applicable European directives and 

an evaluation method of conformity for these directives was done.

 

This product is of protection class II. That means it is equipped with 

enhanced or double insulation.

WEEE symbol. Waste electrical products should not be disposed 

of with household waste. Please recycle where facilities exist. 

Check with your Local Authority or local store for recycling advice.

700W HVLP SPRAY GUN ERBAUER

Summary of Contents for ERB561SRG

























Reviews: