Erbauer ERB400SWP, User Manual

Page: 9 / 16

9
400W AUTOMATIC STAINLESS STEEL SUBMERSIBLE CLEAN WATER PUMP
PUTTING THE PUMP
INTO OPERATION
Attach the hose (Fig. C and D). Screw the provided
accessories onto the pump as illustrated in Fig.A. 32
mm, 25 mm, 19mm and 13mm hoses can be attached
to the universal connecting piece (4). The 19mm and
13mm hoses are attached with the use of special
connecting pieces (Fig.C). It is recommended to secure
the 32 mm and 25 mm hoses with hose clamps.
Components of the universal connecting piece, which
you need (for example, with 32 mm hoses), can be
removed with a knife from the universal connecting
piece (Fig.D). You will achieve optimal results with a
32 mm hose. Please note: A spiral hose significantly
impairs the pumping height and flow rate. Use only
flat hoses!
The on and off switching levels can vary. The specified
values are average values and do not apply if the float
switch is not affixed to the bracket for the float switch (3) .
Utilisation / Range Of Applications
Electric submersible pumps are used in the following areas:
Draining of cisterns, rainwater reservoirs, wells,
ponds, swimming pools and storm drains.
Draining of flooded cellars, boats and yachts.
For aeration and water circulation.
Please Note:
Special Instructions:
Avoid the intake of larger stones!
Maximum percentage of 5% solid material for dirty
water pump.
Basically, all other fluids are not permitted. Not
suitable for biological wastewater treatment plants
and cesspools.
No flammable fluids, gaseous or explosive
substances may be pumped using these pumps.
The maximum temperature of pumped fluids may
not exceed 35°C in continuous operation.