Erbauer ERB383WCH, Original Instructions Manual

Page: 11 / 28

1500W WALL CHASER
the correct ampere rating for your power tool and is in a safe
electrical condition.
9. Ensure your mains supply voltage is the same as indicated
on the rating plate.
10. Your tool is double insulated for additional protection against
a possible electrical insulation failure within the tool.
11. Always check walls, loors and ceilings to avoid hidden
power cables and pipes.
12. After long working period, external metal parts and
accessories could be hot.
13. Only withdraw the blade from the cut when the blade has
been stopped moving.
14. The pivoting blade foot must be held irmly against the
material being cut to reduce saw vibration, blade jumping
and blade breakage.
15. Before cutting, check the cutting line is free of nails, screws,
etc.
16. If possible, ensure the work-piece is irmly clamped to
prevent movement.
17. Never stop the cutting blade by applying side pressure to the
blade.
Warning: Some dust particles created by power sawing, contain chemicals
known to cause cancer, birth defects or other reproductive harm.
Some examples
of these chemicals are:
•
Lead from lead-based paints.
•
Crystalline silica from bricks and cement and other masonry products.
•
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending upon how often you do this type of work.
To reduce your exposure to these chemicals:
• Work in a well-ventilated area.
•
Work with approved safety equipment, such as those dust masks that are specially
designed to ilter microscopic particles.