254MM (10”) COMPOUND MITRE SAW
254MM (10”) COMPOUND MITRE SAW
27
254MM (10”) COMPOUND MITRE SAW
27
254MM (10”) COMPOUND MITRE SAW
11. Workpiece support and repetitive
cutting using the stop plate
Long pieces need extra support. The support
should be placed under the workpiece. Keep
your hand holding the workpiece positioned
171 mm or more away from the blade. The
support must let the workpiece lay flat on the
work table during the cutting operation.
Note
: When mounted on a flat surface, the
mitre saw table is 83 mm high. (See in fig. 31)
12. Auxilary wood fence
When making multiple or repetitive cuts that
result in cut-off pieces of 25 mm or less, it
is possible for the saw blade to catch the
cut-off piece and throw it out of the saw or
into the blade guard and housing, possibly
causing damage or injury. To minimize this,
an auxiliary wood fence can be mounted
to your saw. Holes are provided in the saw
fence to attach an auxiliary wood fence. This
fence is constructed of straight auxiliary wood
approximately 19 mm thick by 64 mm high by
410 mm long. Attach the wood fence securely
and make a full depth cut to make a blade
slot. Check for interference between the wood
fence and the lower blade guard. Adjust if
necessary. (See fig. 32)
Note
:
This auxiliary fence is used only with
the saw blade in the 0° bevel position (90° to
the table). The auxiliary wood fence must be
removed when bevel cutting.
Fig 31
Fig 32
